Software Compatibility - Inter-Tel 8500 User Manual

S C
OFTWARE OMPATIBILITY
Depending upon which software version your telephone system is using, some of the
features included in this guide may not be available for your endpoint. Check with
your system administrator to see which software version your telephone system cur-
rently uses and if there are any features restrictions for your system.
The Model 8500 is compatible with Axxess
and Inter-Tel
Endpoints using Axxess software versions 3.0 to 6.x have limited functionality in the
following areas:
•
The
STN SPDL
ing the Station Speed-Dial feature code (see
•
The
PAGE
ing the Page feature code (see
•
The Message Indicator lamp will not work; however, the
function properly (see
•
The
TRANSFER
light.
The Model 8500 endpoint does not support software Axxess versions 3.0 and earlier.
NOTE:
This information about compatibility applies to endpoints programmed to use
the default button locations. Your buttons may have been programmed differently. If you
are uncertain about the configuration, ask your system administrator.
10
®
5000 system software versions 1.1 and later.
button will not work; however, you can still use this feature by dial-
button will not work; however, you can still use this feature by dial-
page
page 29).
, ,
ANSWER OUTGOING
®
system software versions 7.0 and later,
page 51).
54).
MSG
,
, and
SYS SPDL REDIAL
Inter-Tel
button will still
lamps will not
®
Model 8500 User Guide