Dialing Station Speed-Dial Numbers - Mitel 5312 User Manual

Answering and Placing Calls
To use the dialpad to enter characters:
For example, to enter May 31, you could use the following sequence:

Dialing Station Speed-Dial Numbers

To dial a Station Speed-Dial number:
Page 24
Press the dialpad buttons as shown in the following table.
1. In Alpha Mode (
2. Press 2 once to enter an "A."
3. Press 9 three times to enter a "Y."
4. Press (Message) to switch to Numeric Mode.
5. Press (Transfer) to enter a space.
6. Press 3.
7. Press 1.
8. Press (Speaker), #, or lift the handset to save the entry.
Do one of the following:
• Dial 382, and then enter the Station Speed-Dial location number (0 to 9). The
system dials the number.
• Press (Up) or
press # to select the location and dial the number.
You can also use a Station Speed-Dial button assigned to the number
NOTE you are dialing. See "Assigning Speed-Dial Entries to Programmable
Buttons" on
Characters Represented
Button
(in Alpha Mode)
0 @ : . , 0
1 - & ( ) 1
2 A B C ' 2
3 D E F ! 3
4 G H I * 4
5 J K L # 5
6 M N O ñ 6
7 P Q R S 7
8 T U V ? 8
9 W X Y Z 9
[Message] button is lit), press 6 once to enter an "M."
(Down) to scroll through the speed-dial locations, and then
page 25.
Mitel ® 5312/5324 IP Phone User Guide – Issue 1, September 2009