Port Mirroring Configuration Task List; Commands For Mirroring Configuration - Edge-Core ES3628EA User Manual

another port. The duplicated port is referred to as mirror source port and the duplicating
port is referred to as mirror destination port. A protocol analyzer (such as Sniffer) or
RMON monitoring instrument is often attached to the mirror destination port to monitor
and manage the network and diagnostic.
ES3628EA switch support one mirror destination port only. The number of mirror
source ports are not limited, one or more may be used. Multiple source ports can be
within the same VLAN or across several VLANs. The destination port and source port(s)
can be located in different VLANs.

3.3.2 Port Mirroring Configuration Task List

Specify mirror source port and dentist port
Command
Port mode
port monitor interface <interface-list> {rx| tx|
both}
no port monitor interface <interface-list>

3.3.3 Commands for Mirroring Configuration

3.3.3.1 port monitor
Command：port monitor interface <interface-list> {rx| tx| both}
no port monitor interface <interface-list>
Function ： Specifies port of mirror source; the "no port monitor interface
<interface-list>" command deletes the mirror source port.
Parameter：<interface-list> is the mirror source port list, in which special characters
such as "-"、";" are available; rx is the flow received from the source port;tx is the flow
sent from the source port ;both refers to the flow both into and out from the mirror source
Command Mode：Interface mode
Usage Guide：This command is for configuring the source port of the mirror. There is not
Explanation
Specifies mirror dentist port
"port
<interface-list>
both}",the
refer to the source ports
; the "no port monitor
interface <interface-list>}"
command
port.
127
monitor interface
{rx| tx|
<interface-list>
deletes mirror