Table of Contents
Advertisement
other debugging command and copy the DEBUG message within 3 minutes, send the
recorded message to the technical server center of our company.
2.8 Web Management
2.8.1 Switch Basic Configuration
Users should click "Switch basic configuration" table and configure the switch's clock,
prompts of command-line interface, timeout of quitting Admin mode, etc.
2.8.1.1 Basic Configuration
Users should click "Switch basic configuration" and "BasicConfig" to configure the
switch's clock, prompts of command-line interface and the mapping address relationship
with the host.
Basic clock configuration -configure "date and clock" of the system.
Users should configure HH:MM:SS as 23:0:0 and YY.MM.DD as 2002/08/01. The
complete configuration by clicking on the "Apply" button.
Basic host configuration -configures the mapping relationship between the switch
and the IP address.
Example: configure the Hostname as" test" and then click on the "Apply" button. This
configuration will be applied to the switch.
2.8.1.2 Configure Exec Timeout
Example of configuring the timeout as 6 minutes and then click on the "Apply" button to
complete the timeout of quitting Admin mode.
2.8.2 SNMP Configuration
107
- Quick Links:
- Cli Interface
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
