Ospfv; Introduction To Ospfv3 - Edge-Core ES3628EA User Manual

13.6.5.1.15 show ip protocols
Command: show ip protocols
Function: Display the running routing protocol messages
Default: None
Command Mode: All modes
Example:
show ip protocols
Use show ip protocol command will show the messages of the routing protocol running
on current layer 3 switch
For example, the displayed messages are:
Routing Protocol is "ospf 0"
Invalid after 0 seconds, hold down 0, flushed after 0
Outgoing update filter list for all interfaces is
Incoming update filter list for all interfaces is
Redistributing:
Routing for Networks:
10.1.1.0/24
12.1.1.0/24
Routing Information Sources:
Gateway
Distance: (default is 110)
Address
Routing Protocol is "bgp 0"
Outgoing update filter list for all interfaces is
Incoming update filter list for all interfaces is
IGP synchronization is disabled
Automatic route summarization is disabled
Neighbor(s):
Address
Incoming Route Filter:

13.7 OSPFv3

13.7.1 Introduction to OSPFv3

OSPFv3 （Open Shortest Path First） is the third version for Open Shortest Path First,
and it is the IPv6 version of OSPF Protocol. It is an interior dynamic routing protocol for
Distance Last Update
Mask Distance List
FiltIn FiltOut DistIn DistOut Weight RouteMap
447