Table of Contents
Advertisement
2.8.2.5 RMON and trap configuration
Users should click "Switch basic configuration", "SNMP configuration" and "RMON and
TRAP configuration" to configure the RMON function of the switch.
Snmp Agent state –open/close the switch to be SNMP agent server function.
RMON state -open/close RMON function of the switch.
Trap state -allows device to send Trap messages
Example: choose Snmp Agent state as "Open", choose RMON state as "Open", and
choose Trap state as "Open". Then click on the "Apply" button.
2.8.3 Switch upgrade
Users should click "Switch basic configuration" and "Switch update" to configure the
upgrade Node Tree Diagram. Two categories are explained below:
TFTP Upgrade, including
TFTP client service -to configure TFTP client
TFTP server service -to configure TFTP server
FTP Upgrade, including
FTP client service -to configure FTP client
110
- Quick Links:
- Cli Interface
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
