Chapter 10 Dhcp Configuration; Introduction To Dhcp - Edge-Core ES3628EA User Manual

L3 24 10/100 ports + 4ge
Hide thumbs Also See for ES3628EA:
Table of Contents

Advertisement

Chapter 10 DHCP Configuration

10.1 Introduction to DHCP

DHCP [RFC2131] is the acronym for Dynamic Host Configuration Protocol. It is a
protocol that assigns IP address dynamically from the address pool as well as other
network configuration parameters such as default gateway, DNS server, and default route
and host image file position within the network. DHCP is the enhanced version of BootP.
It is a mainstream technology that can not only provide boot information for diskless
workstations, but can also release the administrators from manual recording of IP
allocation and reduce user effort and cost on configuration. Anther benefit of DHCP is it
can partially ease the pressure on IP demands, when the user of an IP leaves the
network that IP can be assigned to another user.
DHCP is a client-server protocol, the DHCP client requests the network address and
configuration parameters from the DHCP server; the server provides the network address
and configuration parameters for the clients; if DHCP server and clients are located in
different subnets, DHCP relay is required for DHCP packets to be transferred between
the DHCP client and DHCP server. The implementation of DHCP is shown below:
DHCP Client
Explanation:
1. DHCP client broadcasts DHCPDISCOVER packets in the local subnet.
2. On receiving the DHCPDISCOVER packet, DHCP server sends a DHCPOFFER
packet along with IP address and other network parameters to the DHCP client.
3. DHCP client broadcast DHCPREQUEST packet with the information for the DHCP
server it selected after selecting from the DHCPOFFER packets.
4. The DHCP server selected by the client sends a DHCPACK packet and the client
gets an IP address and other network configuration parameters.
The above four steps finish a Dynamic host configuration assignment process. However,
if the DHCP server and the DHCP client are not in the same network, the server will not
DHCPDiscover(Broadcast)
DHCPOFFER(Unicast)
DHCPREQUEST(Broadcast)
DHCPACK(Unicast)
Fig 10-1
DHCP protocol interaction
283
DHCP Server

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents