Troubleshooting - Edge-Core ES3628EA User Manual

L3 24 10/100 ports + 4ge

Hide thumbs Also See for ES3628EA:

Table of Contents

configuration procedure: (only SwitchA is listed,configurations for other switches are

The configuration of Layer 3 switchA:

SwitchA#config

SwitchA (config) #router bgp 1

SwitchA (config-router)#network 192.68.11.0

SwitchA(config-router)#neighbor 172.16.20.2 remote-as 3

SwitchA(config-router)#neighbor 172.16.20.2 route-map AddAsNumbers out

SwitchA(config-router)#neighbor 192.68.6.1 remote-as 2

SwitchA(config-router)#exit

SwitchA(config)#route-map AddAsNumbers permit 10

SwitchA(config-route-map)#set as-path prepend 1 1

13.2.5 Troubleshooting

Faq: The routing protocol could not achieve the routing messages study under

normal protocol running state

Troubleshooting: check following errors:

Each node of route-map should at least has one node is permit match mode. When the

route map is used in routing messages filtering, the routing messages will be considered

not pass the routing messages filtering if certain routing messages does not pass the

filtering of any nodes. When all nodes are set to deny mode, all routing messages will not

pass the filtering in this route-map.

Policy routing Configuration

Show Quick Links

Table of Contents