Dynamic Vlan Configuration - Edge-Core ES3628EA User Manual

based VLAN). Dynamic VLAN supported by the ES3628EA switch includes
Protocol-based VLAN only. Detailed description is as follows
The VLAN is divided by the network layer protocol, assigning different protocol to
different VLANs. This is very attractive to the network administrators who wish to
organize the user by applications and services. Moreover the user can move freely within
the network while maintaining his membership. Advantage of this method enables user to
change physical position without changing their VLAN residing configuration, while the
VLAN can be divided by types of protocols which is important to the network
administrators. Further, this method has no need of added frame label to identify the
VLAN which reduce the network traffic.

5.4.2 Dynamic VLAN Configuration

5.4.2.1 Dynamic VLAN Configuration Task List
1. Configure the correspondence between the Protocols and the VLAN
1. Configure the correspondence between the Protocols and the VLAN
Command
Global Mode
protocol-vlan mode {ethernetii etype
<etype-id>|llc {dsap <dasp-id> ssap
<ssap-id>}|snap etype <etype-id>} vlan
<vlan-id>
no protocol-vlan
etype <etype-id>|llc {dsap <dasp-id>
ssap <ssap-id>}|snap
<etype-id>}|all}
5.4.2.2 Commands for Dynamic VLAN Configuration
5.4.2.2.1 protocol-vlan
Command: protocol-vlan mode {ethernetii etype <etype-id>|llc {dsap <dasp-id>
ssap <ssap-id>}|snap etype <etype-id>} vlan <vlan-id>
no protocol-vlan
<dasp-id> ssap <ssap-id>}|snap etype <etype-id>}|all}
Function: Add the correspondence between the protocol and the VLAN namely specify
the protocol to join specified VLAN. The "no" form of this command deletes all/the
correspondence
{mode {ethernetii
etype
{mode
Explanation
Add/delete the correspondence
between the Protocols and the VLAN,
namely specified protocol
joins/leaves specified VLAN
{ethernetii etype
170
<etype-id>|llc {dsap