Edge-Core ES3628EA User Manual page 76

Displayed information
Community string
Community access
Trap-rec-address
Trap enable
SecurityIP
2.4.3.4 snmp-server community
Command: snmp-server community <string> {ro|rw}
no snmp-server community <string>
Function: Configure the community string for the switch; the "no snmp-server
community <string>" command deletes the configured community string.
Parameter: <string> is the community string set; ro|rw is the specified access mode to
MIB, ro for read-only and rw for read-write.
Command mode: Global Mode
Usage Guide: The switch supports up to 4 community strings.
Example 1: Add a community string named "private" with read-write permission.
Switch(config)#snmp-server community private rw
Example 2: Add a community string named "public" with read-only permission.
Switch(config)#snmp-server community public ro
Example 3: Modify the read-write community string named "private" to read-only.
Switch(config)#snmp-server community private ro
Example 4: Delete community string "private".
Switch(config)#no snmp-server community private
2.4.3.5 snmp-server
Command: snmp-server
no snmp-server
Function: Enable the SNMP proxy server function on the switch. The "no snmp-server"
command disables the SNMP proxy server function
Command mode: Global mode
Default: SNMP proxy server function is disabled by system default.
Usage guide: To perform configuration management on the switch with network manage
software, the SNMP proxy server function has to be enabled with this command.
Example: Enable the SNMP proxy server function on the switch.
Description
Community string
Community access permission
IP address which is used to receive Trap.
Enable or disable to send Trap.
IP address of the NMS which is allowed
to access Agent
76