Revision-Level; Spanning-Tree - Edge-Core ES3628EA User Manual

restores the default setting.
Parameter: <name> is the MSTP region name. The length of the name should less than
32 characters.
Command mode: MSTP Region Mode
Default: Default MSTP region name is the MAC address of this bridge.
Usage Guide: This command is to set MSTP region name. The bridges with same MSTP
region name and same other attributes are considered in the same MSTP region.
Example: Set MSTP region name to mstp-test.
Switch(Config)#spanning-tree mst configuration
Switch(Config-Mstp-Region)#description mstp-test

7.3.5 revision-level

Command: revision-level <level>
no revision-level
Function: In MSTP region mode, this command is to set revision level for MSTP
configuration; The command "no revision-level" restores the default setting to 0.
Parameter: <level> is revision level. The valid range is from 0 to 65535.
Command mode: MSTP Region Mode
Default: The default revision level is 0.
Usage Guide: This command is to set revision level for MSTP configuration. The bridges
with same MSTP revision level and same other attributes are considered in the same
MSTP region.
Example: Set revision level to 2000.
Switch(Config)#spanning-tree mst configuration
Switch(Config-Mstp-Region)# revision-level 2000

7.3.6 spanning-tree

Command: spanning-tree
no spanning-tree
Function: Enable MSTP in global mode and in interface mode; The command "no
spanning-tree" is to disable MSTP.
Command mode: Global Mode and Interface Mode
Default: MSTP is not enabled by default.
Usage Guide: If the MSTP is enabled in global mode, the MSTP is enabled in all the
ports except for the ports which are set to disable the MSTP explicitly.
Example: Enable the MSTP in global mode, and disable the MSTP in the interface 0/0/2.
195