Step 8
Use a hobby knife to cut a 1/4-inch (6mm) piece of tubing
from the 2-inch (52mm) safety tubing.
Step 9
Slide the piece cut in the previous step on a nylon clevis.
Thread the clevis 10-turns onto the threaded end of the 2-56
x 16
/
-inch throttle pushrod wire.
1
4
8
Step 10
Slide the pushrod wire into the tube in the firewall that aligns
with the carburetor arm. Connect the clevis to the carburetor
arm and slide the tubing over the forks of the clevis to keep
the clevis from opening accidentally.
Fuel Tank Installation
Required Parts
Fuselage
Fuel tank brace, front
Fuel tank brace, rear
3mm washer (2)
Fuselage hatch
Fuel tank (assembled)
3mm x 12mm socket head scew (2)
Required Tools and Adhesives
Threadlock
Scissors
Hobby knife with #11 blade
Phillips screwdriver: #2
Hex wrench or ball driver: 2.5mm
Step 1
Locate the items necessary to install the fuel tank in the fuselage.
Hangar 9 Alpha 40 ARF Assembly Manual