Hangar 9 Alpha 40 ARF Assembly Manual page 27


Step 9
Slide the fin into position on the fuselage as shown.
Hangar 9 Alpha 40 ARF Assembly Manual
o
Step 10
Locate a #4 washer and 3mm x 10mm machine screw. Slide
the washer onto the screw, then apply a small amount of
threadlock on the screw.
o
Step 11
Insert the screw into the hole in the fuselage and through
the stabilizer to the preinstalled blind nut on the top of the
stabilizer. Use a #2 Phillips screwdriver to tighten the screw.

Step 12
Repeat Steps 10 and 11 to install the second screw.
27