Table of Contents
Advertisement
I
NSTALLING UPGRADES
This section explains how to install optional equipment into your MFP. This includes:
>
additional RAM memory
>
40GB hard disk drive
>
additional paper tray
>
storage cabinet
O
RDER CODES
M
EMORY UPGRADE
This section explains how to install additional RAM memory into your MFP as a memory
upgrade.
The model comes equipped with 256MB of main memory.This can be upgraded with an
additional memory board containing either 256MB or 512MB, giving a total memory
capacity of either 512MB or 768MB maximum.
1.
Switch the MFP off and disconnect the AC power cable.
2.
Pull open the access panel on the side of the machine.
3.
Carefully remove the new memory board from its wrapping. Try to handle the board
only by its short edges, avoiding contact with any metal parts as far as possible. In
particular, avoid touching the edge connector.
4.
Notice that the memory board has a small cutout in the edge connector, which is
closer to one end than the other.
5.
Identify the RAM expansion slot (1) in the machine.
OPTION
RAM memory:
256Mb
512Mb
40GB HDD
Additional paper tray
Storage cabinet
Installing upgrades > 94
ORDER CODE
01182903
01182904
01186001
01208601
09004619
Advertisement
Table of Contents
