System Configuration Menu - Oki ES5460 User Manual

System configuration menu

ITEM
Pow Save Time
Personality
USB PS Protocol
Clrable Warning
Auto Continue
Manual Timeout
Wait Timeout
Low Toner
Jam Recovery
Error Report
CHOICE DESCRIPTION
5 Adjusts the idling time before the printer
15 automatically switches into power saving
30 mode. In this mode power consumption is
60 reduced to a low level required to just keep
240 the printer operating and ready to receive
data. When a job is sent the MFP will require
a warm-up time of up to 1 minute before
printing can begin.
AUTO This item selects which industry standard
EMULATION emulation your MFP should use. When set to
PCL AUTO, incoming data is examined and the
IBM PPR III XL correct emulation is automatically selected
EPSON FX each time a print job is received.
PS3 EMULATION
RAW Selects PostScript data format for USB port.
ASCII
ONLINE When ONLINE, non-critical warnings, such
JOB as requests for a different paper size, can be
cleared by pressing the ON LINE button.
When set to JOB, they are cleared when the
print job resumes.
ON/OFF Determines whether or not the MFP will
automatically recover from a memory
overflow condition.
OFF Specifies how many seconds the MFP will
30 sec wait for paper to be fed before cancelling
60 sec the job.
5~40~300 Specifies how many seconds the MFP will
wait when received data pauses before
OFF
forcing a page eject. In PostScript Emulation
mode the job will be cancelled if timeout
occurs.
CONTINUE Specifies whether the MFP should continue
STOP printing even after a low toner condition is
detected.
ON/OFF Specifies whether the MFP should perform
jam recovery after a paper jam has
occurred. If ON, the MFP will attempt to
print again any pages lost due to a paper
jam once the jam has been cleared.
ON/OFF If ON, the MFP will print error details when a
PostScript Emulation error occurs.
Configuring your machine.... > 41