Table of Contents
Advertisement
4.
Adjust the rear stopper (1) and paper guides (2) to the size of paper being used.
To prevent paper jams:
>
Do not leave space between the paper and the guides and rear stopper.
>
Do not overfill the paper tray. Capacity depends on the type of paper stock.
>
Do not load damaged paper.
>
Do not load paper of different sizes or types at the same time.
>
Do not pull the paper tray out during printing.
>
Close the paper tray gently.
5.
For face down printing, make sure the face up (rear) stacker (3) is closed (the paper
exits from the top of the MFP). Stacking capacity is approximately 250 sheets,
depending on paper weight.
6.
For face up printing, make sure the face up (rear) stacker (3) is open and the paper
support (4) is extended. Paper is stacked in reverse order and tray capacity is
approximately 100 sheets, depending on paper weight.
7.
Always use the face up (rear) stacker for heavy paper (card stock, etc.).
Do not open or close the rear paper exit while printing as it may
result in a paper jam.
CAUTION!
Loading paper > 20
3
4
Advertisement
Table of Contents
