Table of Contents
Advertisement
Explanation:
1.
DHCP Enable:
Choose Yes to obtain IP/subnet/gateway addresses automatically from DHCP server.
After changing setting from Disable to Enable, switch scanner module power OFF then
ON.
2.
IP Address:
The Internet Protocol (IP) address assigned to your machine by your network
administrator.
3.
Subnet Mask:
The net mask address assigned by your network administrator.
4.
Gateway IP:
The gateway IP address assigned by your network administrator.
5.
SMTP Server:
The IP address of your SMTP Mail Server assigned by your network administrator.
6.
SMTP Port:
The port number of your SMTP Mail Server.
7.
DNS server:
The IP address of DNS Server assigned by your network administrator.
8.
POP3 Server:
The IP address of your POP3 server.
9.
POP3 Port
The port number of your POP3 Server.
Enter the DNS name, or IP and port number of your POP3 server if your mail server
requires POP3 authentication, before sending e-mails from the machine.
NOTE
You must also set up the "Define from" details to allow e-mail sending.
Configuring your machine.... > 23
Advertisement
Table of Contents
