Manual receive
Upon receiving an incoming call, the MFP will ring until you press the Start button to
receive the fax.
To enable the manual receive option:
1.
Press the Menu button to prompt the menu settings screen.
2.
Using the UP arrow key, navigate to Fax Settings and press OK.
3.
Using the UP arrow key, navigate to Setup Fax and press OK.
4.
Using the DOWN arrow key, navigate to Manual Receive and press OK.
5.
Press Return to store the new configuration settings and exit the menu.
Adding a telephone handset
If you want to add a telephone handset to your MFP, connect the line to the Tel socket (in
certain countries it may be necessary to use a telephone plug adaptor).
NOTE
Loop the telephone line round the ferrite once as shown.
You will also need to update the telephone settings to set the ring response:
1.
Press the Menu button on the control panel.
2.
Using the UP arrow key, navigate to Fax Settings and press OK.
3.
Using the UP arrow key, navigate to Setup Fax then press OK.
4.
Using the UP/DOWN arrows keys, navigate to Ring Response and press OK.
5.
Select the required response setting and press OK.
6.
Press Return to store the new configuration setting and exit the menu.
NOTE
Manual receive must also be activated.
See "Manual receive" on page 54.
Configuring your machine.... > 54