Table of Contents
Advertisement
Overseas mode
To avoid transmission problems when faxing overseas, set the fax to overseas mode:
1.
Place your document(s) with text face UP in the ADF or face DOWN on the glass.
2.
Press the Fax Mode button on the control panel to prompt the Fax screen.
3.
Press the Additional Settings button.
4.
Using the DOWN arrow key, navigate to the Overseas Mode setting and press OK.
5.
Select "ON" and press OK.
6.
Press Return to exit the menu and return to the fax screen.
7.
Press Mono to start sending the document(s).
NOTE
After you have completed your fax operation, the machine will automatically
return to the preset value.
Broadcasting
You can send a fax to multiple locations at the same time:
1.
Place your document(s) with text face UP in the ADF or face DOWN on the glass.
2.
Press the Fax Mode button on the control panel to prompt the Fax screen.
3.
Enter the destination fax numbers by either:
>
typing in the number using the numeric keypad
>
pressing the required speed and/or group dial buttons
>
selecting entries from the phone book (see
page
65)
Press OK after entering each fax number.
NOTE
You can send to a maximum 100 different locations.
If a destination fax number has an "extension number", press the Pause
button to input a "-" between numbers. The machine will insert a 1 second
pause when dialling.
4.
Press Return to exit the menu and return to the fax screen.
5.
Press Mono to start sending the document(s).
NOTE
If you make a mistake during the transmission process, press the STOP
button to cancel the operation.
"Searching the phone book" on
Operation > 69
Advertisement
Table of Contents
