Table of Contents
Advertisement
3.
Press the cover release (a) and open the MFP's top cover (b) fully.
If the MFP has been powered on, the fuser will be hot. This area is
clearly labelled. Do not touch.
4.
Note the positions of the four cartridges.
It will be necessary to remove the four image drums to gain access to the paper path.
5.
Holding it by its top centre, lift the cyan image drum, complete with its toner
cartridge, up and out of the printer.
6.
Put the cartridge down gently onto a piece of paper to prevent toner from marking
your furniture and to avoid damaging the green drum surface.
The green image drum surface at the base of the cartridge is very
delicate and light sensitive. Do not touch it and do not expose it to
normal room light for more than 5 minutes.
a
WARNING!
1. Cyan cartridge
2. Magenta cartridge
3. Yellow cartridge
4. Black cartridge
CAUTION!
Troubleshooting > 100
1
2
3
4
Advertisement
Table of Contents
