Standard Configuration - KVH Industries TracPhone V11IP User Manual

TracPhone V11-IP User's Guide
Network Configuration

Standard Configuration

62
In a standard configuration, all four User Ethernet ports and the built-
in Wi-Fi provide direct Internet access without a user login. This is the
default configuration.
Figure 6-3 Standard Configuration
To set up the network in a standard configuration, follow these steps:
1. To enable the ICM's built-in wireless access point (WAP) for
Wi-Fi access, follow the steps in
page 78.
2. Connect your computers and/or other network devices to the
"User Ethernet" ports on the rear panel of the ICM. For
example, you might wish to add an external WAP (or Wi-Fi
router configured for bridge mode) to supplement Wi-Fi
access. Use straight-through 100 Mbps fast Ethernet UTP CAT5
cables (or better) with RJ45 connectors.
Figure 6-4 Standard Configuration Wiring Example
ICM
User Ethernet
1 2 3
LAN: 192.168.5.1
192.168.5.100 192.168.5.101
Bridge PC Officers PC
"Wireless Settings" on
Mobile
Devices
192.168.5.102
192.168.5.103
WAP