KVH Industries TracPhone V11IP User Manual page 59

TracPhone V11-IP User's Guide
Network Configuration
60
If your vessel requires a custom configuration, please contact KVH's
Application Engineering Department at appeng@kvh.com. If you need
to connect a Media Server for IP-MobileCast service, see
Configurations for Media Server" on page
Important!
If you select the Static IP, Dual Dome-Secondary, or Legacy
configuration, you will not be able to use "minivsat.kvh" to access the
web interface. You will need to enter the IP address of the ICM (default
is 192.168.0.9 in Static IP and Legacy modes, 192.168.0.10 in Dual Dome
-Secondary mode). In addition, if you select the Dual Dome-Secondary
or Legacy configuration, you will not be able to change any other
settings on the Network Settings page.
To select an ICM network configuration, follow these steps:
1. At the TracPhone V11-IP web interface, click the Settings tab.
Then click Network Settings.
NOTE: You can also change the ICM's network configuration at the myKVH
web portal (www.mykvh.com). Go to the ICM > Network Configuration
section of the Vessel Details page and select Configure Network.
2. In Network Configuration, click Edit.
3. Select an option from the Configuration drop-down menu.
Then click Save.
Figure 6-2 Selecting a Network Configuration
"Compatible
76.