KVH Industries TracPhone V11IP User Manual page 73

TracPhone V11-IP User's Guide
Network Configuration
74
5. Make sure all computers are configured for DHCP addressing
(see "Configuring Computers for DHCP" on page
connected to the primary system's ICM (via Ethernet cables or
Wi-Fi) will receive IP addresses from the ICM via DHCP. The
ICM serves as a router.
NOTE: By default, the ICM has a gateway of 192.168.5.1 and assigns IP
addresses in the 192.168.5.100-200 range. If this configuration conflicts with
an existing onboard network, you may change the settings at the TracPhone
V11-IP web interface (go to Settings > Network Settings). See
Settings on ICM" on page 86
6. To enable the ICM's built-in wireless access point (WAP) for
Wi-Fi access, follow the steps in
page 78.
for details.
"Wireless Settings" on
80). Devices
"LAN