Standard Configuration
In a standard configuration, Ethernet ports 1 through 4 and the built-in
WAP provide high-speed Internet access, with no user logins or
controls. Internet access is unrestricted. This is the default
configuration.
Figure 7-3 Standard Configuration
To set up the network in a standard configuration, follow these steps:
1. To enable the ICM's built-in wireless access point (WAP) for
Wi-Fi access, follow the steps in
page
2. Connect your computers and/or other network devices to the
ICM. You might wish to add an external WAP (or Wi-Fi router
configured for bridge mode) to supplement Wi-Fi access. Use
straight-through 100 Mbps fast Ethernet UTP CAT5 cables (or
better) with RJ45 connectors.
3. At the TracPhone V3-HTS web interface or mini-VSAT
Manager, select the STANDARD_V3HTS network
configuration. Refer to
on page 61
70.
"Selecting a Network Configuration"
for details.
TracPhone V3-HTS User's Guide
Network Configuration
"Wireless Settings" on
63