KVH Industries TracPhone V11IP User Manual page 117

My VSAT Status
Message
Connection Status
No-Transmit Zones
(if zones are set up)
Antenna State
Satellite
Beam
Description
General status of the ICM's built-in modem:
• Online – Modem is connected to the mini-
VSAT Broadband service; the system is
ready for use
• Initializing
• Waiting for Hub Comm – Modem is
waiting for the antenna to lock onto the
satellite
• Attempting Login – Modem is attempting
to log into the mini-VSAT Broadband
service
• Offline – Modem is not connected to mini-
VSAT Broadband
• Updating – Modem is downloading new
software or satellite configuration files
Es/No: Quality of the received satellite
signal; Es/No = Energy per symbol/noise
power per Hertz
Status of the no-transmit zones:
• Transmit Enabled (green) – Antenna is not
pointing within a no-transmit zone
• Transmit Disabled (orange) – Antenna is
pointing within a no-transmit zone; zones
are being enforced
• Transmit Enabled (red) – No-transmit
zones are being ignored; antenna can
transmit without restriction
General status of the antenna:
• Tracking
• Initializing
• Searching
• Cable Unwrap – Unwrapping the internal
cable; the cable can wrap up to 710°
• Waiting for Modem
• Idle
• Error
Satellite that the modem has currently
selected for tracking
Beam of the satellite currently selected for
tracking; also indicates whether the beam is
Ku-band or C-band
TracPhone V11-IP User's Guide
Troubleshooting
121