KVH Industries TracPhone V11IP User Manual page 64

3. Fill out the online form at www.kvh.com/staticip. Be sure to
read all of the details on this form. An additional monthly fee
for static IP service will apply.
Important!
Only the "User Ethernet 4" port on the ICM can be used to connect
static IP devices, as this port bypasses the ICM's local subnet to
connect directly to the built-in modem.
4. Connect your network device or computer to the "User
Ethernet 4" port on the rear panel of the ICM. Use a straight-
through CAT5 (or better) Ethernet cable with RJ45 connectors.
Figure 6-6 Static Configuration Wiring Example
ICM
User Ethernet
1 2 4
LAN: 192.168.5.1
DHCP
192.168.5.100 192.168.5.101
Bridge PC Officers PC
TracPhone V11-IP User's Guide
Network Configuration
WAN: 192.168.72.99
Static
192.168.72.100
Firewall
Engine Room PC
65