Configuration - KVH Industries TracPhone V7 User Manual

3. Configuration

This chapter explains how to change the brightness of the control unit's
display, set up an RF radiation hazard zone, turn the DVB-Assist search
mode on or off, and reset the system to its factory configuration. It also
explains how to configure your computer for a wired Ethernet
connection to the TracPhone V7 system. For details on setting up a
wireless network, refer to the instructions provided with your wireless
access point (purchased separately).
Contents
Adjusting the Control Unit Display Brightness................. 21
Configuring RF Radiation Hazard Zones .......................... 23
Setting DVB-Assist Search Mode On/Off ......................... 31
Resetting the System to Factory Conditions.................... 33
Configuring Your Computer for mini-VSAT Broadband.... 35
Requesting Static IP Addressing ..................................... 42
TracPhone V7 User's Guide
Chapter 3 - Configuration
19