Figure 1.13 Controller (Iscsi Model) - Fujitsu Eternus DX60 S2 User Manual

Chapter 1 Components
1.1 Controller Enclosure
■
iSCSI model

Figure 1.13 Controller (iSCSI model)

●
Part explanation
• LAN (RMT) port, LAN (MNT) port
These are the RJ-45 connectors to connect LAN cables. LAN (RMT) port is not used in the
EMEA&I region.
A single controller has one LAN (RMT) port and one LAN (MNT) port.
• iSCSI port (0 (left), 1 (right))
These ports are RJ45 connectors for LAN cables.
• PWC port
This port is not used.
• DI (OUT) port
This port is used to connect a controller enclosure to a drive enclosure with a miniSAS cable.
ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
SCU STATUS LED
IDENTIFY LED
DI (OUT) LINKUP LED
LAN (RMT) port
LAN (MNT) port
ACT LED
LINK LED
DI (OUT) port
18
Copyright 2011 FUJITSU LIMITED
iSCSI port (0 (Left), 1 (Right))
UNIT READY/FAULT LED
MASTER LED
PWC port
FAULT LED
LINK LED
P3AM-5512-02ENZ0