Fujitsu Eternus DX60 S2 User Manual page 102

Appendix A Event Notification Message List
A.2 Message List
Event type
and event
code
J 09SSMM00 5
J 0ASSMM0p 5
J 0CSSMM00 5
J 0ESSMM00 5
ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
SNMP Trap
Trap
TrapItemID (*1)
No.
0900MM00 0x00 Controller Module#m(zz xxHz) SAS Port Warning
<pppppppppppp ssssssssss rrrrr>
CM SAS Port error is detected.
0A00MM0p 0x00 Controller Module#m(zz xxHz) BE Expander Port#p
Warning <pppppppppppp ssssssssss rrrrr>
CM BE Expander Port error is detected.
0C00MM00 0x00 Controller Module#m(zz xxHz) Flash ROM Warning
<pppppppppppp ssssssssss rrrrr>
CM Flash ROM error is detected.
0E00MM00 0x00 Controller Module#m(zz xxHz) NAND Flash Warning
<pppppppppppp ssssssssss rrrrr>
CM NAND Flash error is detected.
102
Copyright 2011 FUJITSU LIMITED
Upper: Message
Lower: Description
SS: Component subtype
MM: CM module ID (10 – 11)
m: CM number (0 – 1)
zz: Model name (FC4G, SAS, or iSCSI)
xx: CPU frequency (1.2GHz)
pp...: Component number
ss...: Serial number
rr...: Version
SS: Component subtype
MM: CM module ID (10 – 11)
p: Port number (0 – 2)
m: CM number (0 – 1)
zz: Model name (FC4G, SAS, or iSCSI)
xx: CPU frequency (1.2GHz)
pp...: Component number
ss...: Serial number
rr...: Version
SS: Component subtype
MM: CM module ID (10 – 11)
m: CM number (0 – 1)
zz: Model name (FC4G, SAS, or iSCSI)
xx: CPU frequency (1.2GHz)
pp...: Component number
ss...: Serial number
rr...: Version
SS: Component subtype
MM: CM module ID (10 – 11)
m: CM number (0 – 1)
zz: Model name (FC4G, SAS, or iSCSI)
xx: CPU frequency (1.2GHz)
pp...: Component number
ss...: Serial number
rr...: Version
Remarks
These messages
are notified when
"Module reported a
Warning" is enabled
for Warning Severity
Level in Setup
Event Notification.
They are not notified
during maintenance
operations.
P3AM-5512-02ENZ0