General Specification; Touch Controller (Optional: For Idk-2112R Only); Touch Controller Characteristics - Advantech IDK-2112 Series User Manual

5.1.6

General specification

Item
1 Frame size
2 View Area
3 Active Area
4 Total Thickness
5 Tail length
5.2

Touch controller (Optional: for IDK-2112R only)

Advantech ETM-RES04C Touch Control Board is the ultimate combo board. This
touch panel controller provides optimum performance for your analog resistive touch
panels for 5-wire models. Communication with the PC is directly through USB and
RS-232 connector. The touch panel driver emulates mouse left and right button func-
tions.
5.2.1

Touch Controller Characteristics

5.2.1.1 Specifications
Electrical Features
 +5 Vdc/ 100 mA typical, 50mV peak to peak maximum ripple and noise.
 Bi-directional RS-232 serial communication and USB 1.1 full speed
 Report rate of RS-232 is 180 points/sec (max.), USB is 200 points/sec (max.)
Unaffected by environmental EMI

Panel resistance of 5-wire resistive model is from 50 to 200 ohm (Pin to pin on

same layer)
 Touch resistance under 3K ohm
Specification
261.800.30 X 199.800.30 mm
249.800.30 X 188.500.20 mm
246.800.30 X 185.500.20 mm
2.200.20 mm
205.006.00 mm
25 IDK-2112 User Manual