Table of Contents
Advertisement
Advantech ETM-RES04C Touch Control Board, the ultimate combo board. This
touch panel controller provides the optimistic performance of your analog resistive
touch panels for 5 wire models. It communicates with your PC system directly
through USB and RS-232 connectors. You can see how superior the design is in sen-
sitivity, accuracy and friendly operation. The touch panel driver emulates mouse left
and right button function and supports the following OS.
6.1
Touch Controller Characteristics
6.1.1
Specifications
Electrical Features
+5 Vdc/ 100 mA typical, 50mV peak to peak maximum ripple and noise.
Bi-directional RS-232 serial communication and USB 1.1 full speed
Report rate of RS-232 is 180 points/sec (max.). And, USB is 200 points/sec
(max.)
Unaffected by environmental EMI
Panel resistance of 5-wire resistive model is from 50 to 200 ohm (Pin to pin on
same layer)
Touch resistance under 3K ohm
Serial Interface
EIA 232E (Serial RS-232)
No parity, 8 data bits, 1 stop bit, 9600 baud (N, 8, 1, 9600)
Supports Windows 2000/ Vista/ XP/ 7, Windows CE 5.0/ 6.0/ 7.0, Windows NT4,
Linux, DOS, QNX
USB Interface
Conforms to USB Revision 1.1 full speed.
If the USB is connected to the controller, the controller will communicate over
the USB, and will not communicate over the serial port.
Supports Windows 2000/ Vista/ XP/ 7, Windows CE 5.0/ 6.0/ 7.0, Linux, QNX
Touch Resolution
2,048 x 2,048 resolution
Response Time
Max. 20 ms
IDK-1115R User Manual
24
Advertisement
Table of Contents
