Touch Controller Characteristics; Specifications; Environmental Feature - Advantech IDK-1110P Series User Manual

6.1

Touch Controller Characteristics

The PenMount PM1310 control board is a high specification (Projected Capacitive
Input, PCI) touch panel controller product introduced by PenMount. The PenMount
PM1310 can be applied in the consumer, commercial and the industrial fields.
The PenMount PM1310 provides two types of interface, USB, I2C and UART inter-
face, and also supports a wide range of operating systems such as Windows and
Linux.There are four connectors on this board: two 40 Pins ZIF connectors for PCI
touch screen FPC cable, one USB connector for 4-pin USB cable, and one I2C/
UART connector for 7-pin I2C cable (optional).
6.2

Specifications

Electrical Features
 Max Touch Line: 35 Driving lines, 23 sensing line
 Sampling rate: > 160sps (Single)
 Operation Voltage Vcc: +5V, ±5%
 Power Consumption: (Typ.)
 Working Mode: 33.2 mA/5 V
 Idle Mode: 23.2 mA/5 V
Sleep Mode: 1.0 mA/5 V

 RS specification: IEC61000-4-3 Level 3, Criteria A (For 1.8 mm Top Glass,
Dual touch)
 CS specification: IEC61000-4-6 Level 3, Criteria A (For 1.8 mm Top Glass,
Dual touch)
Interface
 Support: USB, UART, I2C
 USB: Full-speed, 12Mbps
 UART interface 38400 baud rate / 8 bit data / non parity / one stop bit / non-PnP
I2C, Slave, support 400kHz specifications
 Touch Resolution: 2,048 x 2,048 resolution
 Response Time: 30 ~ 50 ms
 Dimension: 70 mm x 30mm x 1 mm
6.3

Environmental Feature

Reliability
 MTBF is 1,920,000 hours
Temperature Ranges
Operating: -30° C ~ 70° C

 Storage: -40° C ~ 85° C
Relative Humidity
 10~90% RH at 60° C, RH Non-condensing
IDK-1110P User Manual
DC
DC
DC
24