Touch Controller Characteristics; Specifications; Environmental Feature - Advantech IDK-2110R XGA Series User Manual

6.1

Touch Controller Characteristics

Advantech ETM-RES05C Touch Control Board is the ultimate combo board. This
touch panel controller provides optimum performance for your analog resistive touch
4-wire model panels. It communicates with the PC directly through USB and RS-232
connectors. You can see how superior the design is through its sensitivity accuracy
and friendly operation. The touch panel driver emulates mouse left and right button
functions and supports the following OS.
6.2

Specifications

Electrical Features
 +5 Vdc/ 100 mA typical, 50mV peak to peak maximum ripple and noise.
 Bi-directional RS-232 serial communication and USB 1.1 full speed
 Report rate of RS-232 is 180 points/sec (max.). And, USB is 200 points/sec
(max.)
 Unaffected by environmental EMI
 Panel resistance of 4-wire resistive model is from 50 to 200 ohm (Pin to pin on
same layer)
 Touch resistance under 3K ohm
Serial Interface
 EIA 232E (Serial RS-232)
 No parity, 8 data bits, 1 stop bit, 9600 baud (N, 8, 1, 9600)
 Supports Windows 2000/ Vista/ XP/ 7, Windows CE 5.0/ 6.0/ 7.0, Windows NT4,
Linux, DOS, QNX
USB Interface
 Conforms to USB Revision 1.1 full speed.
 If the USB is connected to the controller, the controller will communicate over
the USB, and will not communicate over the serial port.
 Supports Windows 2000/ Vista/ XP/ 7, Windows CE 5.0/ 6.0/ 7.0, Linux, QNX
Touch Resolution
 2,048 x 2,048 resolution
Response Time
 Max. 20 ms
6.3

Environmental Feature

Reliability
 MTBF is 200,000 hours
Temperature Ranges
 Operating: -25°C ~ 85°C
 Storage: -25°C ~ 85°C
IDK-2110R XGA User Manual 22