Working With Scan Settings In Scangear; Defining Preview Scan Settings In Simple Mode - Canon MultiPASS F50 Software User's Manual

Working with Scan Settings in ScanGear

When you use ScanGear before scanning, typically you scan a preview of
the document first. The preview image enables you to review the results
of your scanned image and make any necessary adjustments (for
example, to size, tone, and so on). When you are satisfied with the results,
you then perform the final scan of the document.
The following instructions summarize the procedures for scanning an
image with ScanGear.
To scan an image in ScanGear:
1. In the ScanGear window, click whether you want to work in Simple
Mode or Advanced Mode.
2. On the appropriate tabs, specify the desired preview scan settings for
your image, such as the color mode, scan resolution, and page size.
3. Click Preview.
4. Review the display of the scanned preview image. Adjust the
properties of your image as necessary.
5. With your document in the printer, click Scan to perform the final
scan of your image.

Defining Preview Scan Settings in Simple Mode

Simple Mode enables you to use a more simplified screen, providing
basic but fewer choices, in defining the scan settings for the preview
image. You choose an image type that determines the predefined color
mode and resolution for scanning your image. You can define and delete
custom image types as needed.
76 Scanning
6
6
Chapter 5