Download Print this page

Setting Rgb Or Hsi Color Control Mode - Martin Easypix 300 User Manual

Hide thumbs

Advertisement

Setting RGB or HSI color control mode

To set the Easypix system to RGB mode, set DIP switch pin 10 to OFF.
The three DMX channels will now control red, green and blue.
To set the Easypix system to HSI mode, set DIP switch pin 10 to ON.
The three DMX channels will now control hue, saturation and intensity.
28
Figure 10: Martin™ DIP Switch Calculator
Easypix user manual

Advertisement

loading

This manual is also suitable for:

Easypix 1200