Destinations - Aastra Ascotel Office 45 Operating Instructions Manual

Settings with the System Assistant

Destinations

Lets you determine where calls are to be routed in certain situations. Destinations can be internal or
external phone numbers.
Changing the call distribution
Menu path: 2-Destinations/1-CDE setting.
Lets you change the name of an existing call distribution. The DDI number and the switch positions are
displayed.
A name can consist of up to 17 characters and must start with a letter.
The name is used for the CNIP (Calling Name Identification Presentation). The name will then appear on
the display of any called party using a system phone or ISDN phone.
Destinations can be specified for three switch positions. */# procedures on a phone are used to specify in
each case which switch position is currently valid.
Specifying Destinations for Emergency Calls
Menu path: 2-Destinations/2-Emergency number
Lets you specify the phone numbers to be used as emergency destinations for three switch positions. */#
procedures on a phone are used to specify in each case which switch position is currently valid.
The emergency number preconfigured in the system is "12". Any user who dials "12" is connected
through to the emergency destination. The destination is the currently valid switch position of switch
group 1. The destination can be internal or external.
Allocating Ringing Pattern for the General Bell
Menu path: 2-Destinations/3-Coded ringing/2-Modify
Lets you allocate each of the 5 different ringing patterns (ringing melodies or flash frequencies) to a phone
number.
The general bell is an external piece of supplementary equipment with an acoustic or visual signal. It is
used as a substitute - albeit it limited - for a pager system. You can page up to 5 internal users with a
particular ringing pattern using the general bell feature. A user who recognizes his ringing pattern can
answer the call on any phone. The ringing patterns consist of one long signal followed by 1 to 5 short
signals. The ringing pattern digit designates the number of short signals.
Specifying a Forwarding Destination for "Do not Disturb"
Menu path: 2-Destinations/4-Do not disturb.
Lets you specify a central call forwarding destination. Calls for users who have activated "Do not disturb"
are routed to this phone number.
18