Digital Input/Output Terminal Block; Lan Connectors; Figure 3-13: Dio Terminal Block Pinout Location; Table 3-1: Dio Terminal Block Pinouts - IEI Technology DRPC-120-BTi User Manual

DRPC-120-BTi Embedded System

3.9.1 Digital Input/Output Terminal Block

CN Label: DIO
Terminal block
CN Type:
See Figure 1-4
CN Location:
See Table 3-1 and Figure 3-13
CN Pinouts:
The digital I/O terminal block provides programmable input and output for external devices.
The digital I/O provides 4-bit output and 4-bit input. The pinouts for the digital I/O terminal
block are listed in the table below.
Pin Description
1 DGI_0
3 DGI_1
5 DGI_2
7 DGI_3
9 Isolator GND

Table 3-1: DIO Terminal Block Pinouts

Figure 3-13: DIO Terminal Block Pinout Location

3.9.2 LAN Connectors

RJ-45
CN Type:
See Figure 1-2
CN Location:
See Table 3-2 and Table 3-3
CN Pinouts:
The LAN connectors allow connection to an external network.
Pin Description
2 DGO_0
4 DGO_1
6 DGO_2
8 DGO_3
10 Isolator Vin
Page 27