Product Description - Planet Networking & Communication wgsw-28040 User Manual

24-port 10/100/1000t+ 4-port gigabit tp/sfp combo managed switch
Hide thumbs Also See for wgsw-28040:
Table of Contents

Advertisement

1.2 Product Description

PLANET WGSW-28040 is a 28-Port 10/100/1000Mbps with 4 Shared SFP Managed Gigabit Switch specially designed to
build a full Gigabit backbone to transmit reliable and forward data to remote network through fiber optic. It provides 28-Port
10/100/1000Base-T copper with 4 Shared 100/1000Base-X SFP fiber optic interfaces with inner power system. Besides
support for 20Gbps switch fabric to handle extremely large amounts of video, voice and important data in a secure topology, the
WGSW-28040 provides user-friendly but advanced IPv6 / IPv4 management interfaces and abundant L2 / L4 switching
functions. It is the best investment for businesses/SOHOs expanding or upgrading their network infrastructure. The features of
enhanced management are shown below:
‧ 802.1X Authentication / RADIUS / TACACS+
‧ 802.1Q VLAN
‧ SNMP Monitor and SNMP Trap
‧ IGMP/MLD Snooping
‧ Rapid Spanning Tree
IPv6 / IPv4 Full-functioned Secure Switch
The WGSW-28040 is the ideal solution to fulfilling the demand of IPv6 management Gigabit Ethernet Switch. It supports both
IPv4 and IPv6 management functions and can work with original network structure. It provides advanced Layer 2 to Layer 4 data
switching and Quality of Service traffic control, Access Control List, network access control and authentication, and Secure
Management features to protect building automation network connectivity with reliable switching recovery capability that is
suitable for implementing fault tolerant and mesh network architectures.
Spanning Tree Protocol for High Available Network System
The WGSW-28040 features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates
Spanning Tree Protocol (802.1s MSTP) into customer's automation network to enhance system reliability and uptime.
Flexibility and Extension Solution
The WGSW-28040 provides 4 Gigabit TP/SFP combo interfaces supporting 10/100/1000Base-T RJ45 copper to connect with
surveillance network devices such as NVR, Video Streaming Server or NAS to facilitate surveillance management. Or through
these dual-speed fiber SFP slots, it can also connect with the 100Base-FX / 1000Base-SX/LX SFP (Small Form-factor
Pluggable) fiber transceiver and then to backbone switch and monitoring center over a long distance. The distance can be
extended from 550 meters to 2 kilometers (multi-mode fiber) and up to above 10/20/30/40/50/70/120 kilometers (single-mode
fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
11
User's Manual of WGSW-28040

Advertisement

Table of Contents
loading

Table of Contents