Konica Minolta bizhub C250 User Manual page 614

Utility
11
Beside "# of Counters Assigned for Users", specify the desired setting.
– Press the [C] (clear) key to erase the value, and then use the keypad
to specify the desired value (between 1 and 999).
– If user authentication and account track settings have been ap-
plied, counters can be assigned to both accounts and users, and
counts for both can be totaled.
12
Touch [OK].
– If the setting for "User Authentication" or "Account Track" was
changed, the message "Are you sure you want to clear all data?"
appears.
13
Touch [Yes].
The authentication method is set.
Continue by specifying settings for user authentication and account
track.
Reminder
Do not differentiate between uppercase and lowercase letters in the user
name for the external server. Since the C250 cannot differentiate be-
tween uppercase and lowercase letters, the operation may not be per-
formed correctly.
Note
"Synchronize User Authentication & Account Track" appears if "User Au-
thentication" is set to "ON (External Server)" or "ON (MFP)" and "Account
Track" is set to "ON".
If "Synchronize User Authentication & Account Track" is set to "Synchro-
nize", even when "Public User Access" is set to "Allow", "Public User Ac-
cess" changes to "Restrict".
C250
12
12-83