Utility
Parameter
When AMS Direction is
Incorrect
Auto Zoom (Platen)
Auto Zoom (ADF)
Select Tray when APS
OFF
Select Tray for Insert
Sheet
Print Setting for Sepa-
rate Scan
Print Jobs During Copy
Operation
C250
Description
Select whether or not printing continues
when the paper and document orienta-
tions are different with the "Auto Paper
Select" setting selected.
• Print:
The Zoom setting is automatically set
and the copy is printed on paper of
the specified size in the specified ori-
entation.
• Delete Job:
The job is deleted, and no copies are
printed.
Select whether or not a Zoom setting is
automatically selected when a paper
tray is selected (except when "Auto Pa-
per Select" is set) while a document is
placed on the original glass.
Select whether or not a Zoom setting is
automatically selected when a paper
tray is selected (except when "Auto Pa-
per Select" is set) while a document is
loaded into the ADF.
Select which paper tray is selected when
the "Auto Paper Select" setting is can-
celed.
• Tray Before APS ON:
The paper tray that was being used
before the "Auto Paper Select" setting
was selected is selected.
• Default Tray:
The 1st tray is used.
Select the default paper tray loaded with
paper for the cover pages, inserted pag-
es and chapter title pages.
Select whether copies are printed as the
document is being scanned or after the
entire document has been scanned
when scanning a document in separate
batches or when scanning a multiple-
page document from the original glass.
• Auto Print:
Printing of copies that can be printed
begins while the document is being
scanned.
• Batch Print:
Printing begins after all pages of the
document have been scanned.
Select whether or not print data or fax
data can be accepted for printing while a
copy operation is being performed.
• Accept:
Print data and fax data can be accept-
ed and printed.
• Receive Only:
Print data and fax data is printed after
the copy operation is finished.
12
Default Setting
Print
OFF
ON
Tray Before APS ON
Tray 2
Auto Print
Accept
12-23