Adf - Konica Minolta bizhub C250 User Manual

Copy operations
Hide thumbs Also See for bizhub C250:
Table of Contents

Advertisement

Troubleshooting
Symptom
The edge of the printed
output is dirty.
Even though the paper
misfeed was cleared,
copies cannot be pro-
duced.
Printing with the "2→1"
or "2→2"
Simplex/Duplex settings
are not possible.
Copying is not possible
even though the pass-
word is entered on a ma-
chine with user
authentication/account
track set.

ADF

Symptom
The document is not fed.
C250
Possible Cause
Is the document transfer belt
dirty?
Was the selected paper size
larger than the document
(with a Zoom setting of
"×1.000")?
Is the orientation of the docu-
ment different from the orien-
tation of the paper (with a
Zoom setting of "×1.000")?
Was the copy reduced to a
size smaller than the paper
(with a reduced zoom ratio
specified)?
Are there paper misfeeds at
other locations?
Have settings been selected
that cannot be combined?
Did the message "Your ac-
count has reached its maxi-
mum color-copy (black-copy)
allowance." appear?
Possible Cause
Is the ADF slightly open?
Is the document one that
does not meet the specifica-
tions?
Is the document correctly
loaded?
Remedy
Clean the document transfer belt
with a soft cloth dampened with a
mild detergent. (See p. 10-4.)
Select a paper size that is the same
size as the document.
Otherwise, select the "Auto Zoom"
setting to enlarge the copy to the
selected paper size. (See p. 3-38.)
Select a paper size that is the same
size as the document. Otherwise,
select a paper orientation that is the
same as that of the document.
Select a zoom ratio that adjusts the
document size to the selected pa-
per size. (See p. 3-38.)
Otherwise, select the "Auto Zoom"
setting to reduce the copy to the se-
lected paper size. (See p. 3-38.)
Check the touch panel for other pa-
per misfeed indications, and then
remove any misfed paper at all other
locations. (See "Paper misfeed indi-
cations" on page 5-7.)
Check the combinations of the se-
lected settings.
Contact your administrator.
Remedy
Securely close the ADF.
Check that the document is correct-
ly placed on the original glass.
Position the document correctly.
(See p. 3-7.)
5
5-57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents