Konica Minolta bizhub C250 User Manual page 565

12
!
Detail
For the procedure on adjusting the printer, refer to "Adjusting the printer"
on page 12-50.
For the procedure on adjusting the finisher, refer to "Adjusting the finisher
(FS-603)" on page 12-58.
The Finisher Adjustment parameters that are available differ depending
on the installed finisher.
* Available only if optional finisher FS-603 is installed.
** Available only if the saddle stitcher is installed on optional finisher FS-
514.
For the procedure on adjusting the color registration, refer to "Adjusting
the color registration for yellow, magenta and cyan" on page 12-72.
For the procedure on adjusting the gradation levels, refer to "Adjusting
the gradation levels" on page 12-75.
For details on displaying [Erase Leading Edge], contact your technical
representative.
For details on displaying [Scanner Adjustment] and [ADF Adjustment],
contact your technical representative.
List/Counter
Parameter
Management List
Paper Size/Type Counter
12-34
Job Settings List
Description
The machine settings can be printed.
Store combinations of paper sizes and paper
types to be counted.
Utility
C250