Electrostatic Charger Wire - Konica Minolta bizhub C250 User Manual

10

Electrostatic charger wire

If the electrostatic charger wire is dirty, streaks will appear though the printed
images. If this occurs, follow the procedure described below to clean the
electrostatic charger wire.
1
Open the machine's front door.
2
Slowly pull out the
charger-cleaning tool as
far as possible. Next,
slowly push in the charg-
er-cleaning tool as much
as possible. Repeat the
above operations three
times.
3
Securely insert each charger-cleaning tool, and then close the front
door.
10-6
Care of the machine
C250