Konica Minolta bizhub C250 User Manual page 210

Basic copy operations
When Finisher FS-501 is installed
Paper Weight
16 lb to
24 lb
Number of Bound Pages
2 sheets
3 to 5 sheets
6 to 10 sheets
11 to 20 sheets
21 to 30 sheets
!
Detail
In order for the copies to be stapled, all of the following conditions must
be met.
The paper width must be between 7-1/4 in. and 11-3/4 in..
The paper length must be between 7-1/4 in. and 17 in..
If the "Mixed Original" setting is selected, all copies must have the same
paper width.
If a Staple setting is selected, the "Sort" setting is automatically selected.
A Staple setting cannot be used together with the "Offset" setting.
If a Staple setting is to be selected, select the orientation in which the
document is positioned and the orientation of the page to be stapled,
otherwise the copies may not be stapled as desired.
For details on specifying the document orientation, refer to "Selecting the
document orientation (Original Direction settings)" on page 3-24.
C250
Paper Size
8-1/2 × 11 w/v,
7-1/4 × 10-1/2 w/v
11 × 17 w, 8-1/2 × 14 w
Maximum Number of Sets
100 sets
80 sets
60 sets
40 sets
33 sets
Loading Capacity (detected with ei-
ther measurement)
1,000 sheets 6 in.
500 sheets 3 in.
200 sheets
400 sheets
600 sheets
800 sheets
1,000 sheets
3
3-73