Copier Setting - Konica Minolta bizhub C250 User Manual

12

Copier setting

Parameter
Auto Paper Select for
Small Original
Auto Booklet ON when
Fold & Staple
Auto Zoom For Com-
bine/Booklet
Sort/Group Auto Change
12-22
Description
Select whether copying is permitted
when the "Auto Paper Select" setting is
selected and either no document is
placed on the original glass or the docu-
ment placed on the original glass is too
small for its size to be detected.
• Copy on Small Size:
The document size is determined to
be 5-1/2 × 8-1/2, and copies are pro-
duced on 5-1/2 × 8-1/2-size paper.
• Copy on Letter:
The document size is determined to
be 8-1/2 × 11, and copies are pro-
duced on 8-1/2 × 11-size paper.
• Prohibit Copy:
Copies cannot be produced since the
document size cannot be detected.
Before pressing the [Start] key, the
paper tray (paper to be printed on)
must be selected.
Select whether or not the "Booklet"
function is selected automatically when
the "Fold & Staple" setting is selected.
This parameter is available only if option-
al finisher FS-603 or saddle stitcher is in-
stalled.
Select whether or not the preset zoom
ratios are automatically selected when
"Auto Paper Select" is set and a Com-
bine Originals or Booklet setting is se-
lected.
• Auto Display Zoom Ratio:
The following zoom ratios are set.
2 in 1, Booklet × 0.647
4 in 1 × 0.500
8 in 1 × 0.323
• OFF:
No zoom ratio is selected automati-
cally.
Select whether or not the "Sort" setting
is automatically selected when 2 or more
copies are set to be printed in a single
job.
• ON:
When a document is loaded into the
ADF and the [Start] key is pressed, the
"Group" setting is automatically se-
lected if the document consists of
only one page or the "Sort" setting is
automatically selected if the docu-
ment consists of two or more pages.
• OFF:
The "Sort" and "Group" settings are
not selected automatically.
Utility
Default Setting
Prohibit Copy
Auto Select Booklet
Auto Display Zoom Ratio
ON
C250