Konica Minolta bizhub C250 User Manual page 433

8
Can sizes in metrics be displayed?
?
% Touch [
Size] is touched, the Custom Size screen appears. If [Photo Size] is
touched, the Photo Size screen appears.
Can any size be specified?
?
% Any size can be specified from the Custom Size screen. Touch [X]
or [Y], touch [↔] to switch between the integer and the fraction, and
then touch [–] and [+] to specify the size of the document.
If a decimal value is displayed in the screen, press the [C] (clear)
key, and then use the keypad to type in the setting. For details on
switching between decimal and fraction values, refer to "System
setting" on page 12-17.
If a decimal value is displayed in the screen and the specified value
is outside the allowable range, the message "Input Error" appears.
Type a value within the allowable range. If the value was incorrectly
entered, press the [C] (clear) key to erase the value, and then spec-
ify the correct value.
5
If necessary, specify any other copy settings.
6
Using the keypad, type in the desired number of copies.
7
Press the [Start] key.
8-66
] or [ ] to display a different list of sizes. If [Custom
Application functions
C250