Konica Minolta bizhub C250 User Manual page 123

2
11
Close the upper right-side door.
– After printing envelopes, return the left and right M2 release levers
to their center positions.
!
Detail
When loading paper exceeding 11 × 17 size into the 1st tray, the paper
can have a width up to 12-1/4 in. and a length up to 18 in..
For details on specifying the paper size for the 1st tray, refer to "To spec-
ify a paper size (set size settings)" on page 7-11.
If special paper is loaded, the paper type setting must be specified. For
details, refer to "To specify a setting for special paper" on page 7-21.
Reminder
Be careful not to touch the surface of the paper take-up roller with your
hands.
If the lateral guides are not positioned correctly for the loaded paper, the
paper size will not be correctly detected. Be sure to adjust the lateral
guides to the size of the loaded paper.
Before loading envelopes, press them down to make sure that all air is
removed, and make sure that the folds of the flaps are firmly pressed,
otherwise the envelopes may become wrinkled or a paper misfeed may
occur.
When loading envelopes, load them in the w orientation with the flap side
down, as shown in the illustration. If the envelopes are loaded with the
flap side up, a paper misfeed may occur. The flap side of envelopes
cannot be printed on.
2-50
Before making copies
C250