Konica Minolta bizhub C250 User Manual page 422

Application functions
4
Touch [
– To cancel changes to the settings, touch [Cancel].
– To cancel the "Brightness" parameter, touch [OFF].
– The "Sharpness" parameter can only be specified in single incre-
ments.
– In the Color Balance screen, touch the button for a color, and then
specify the adjustment setting.
How can a setting be specified for the Adjust Color parameter?
?
% To change the setting, touch [
specify a setting between -3 and +3 in increments of 1 or 1/3.
5
Touch [OK], and then touch [OK] in the next screen that appears.
Note
Even though the setting can be specified in increments of 1/3, the setting
will appear at the nearest full increment in the Adjust Color screen.
C250
], [ ], [ ], and [ ] to change the setting.
], [ ], [ ], and [
8
] to
8-55