Projector Components - Christie D4K2560 User Manual

Installation and Setup

Projector Components

A
ID Item
A Touch Panel Controller (TPC)
B LED Status Indicators
C Manual Douser Override
D Lamp Door and Lamps
E Exhaust Duct and Vane Switch
F Liquid Cooling Air Filter Cover
and Air Filter
G Shroud (2-piece)
H Projection Lens
I Air Filter Cover and Air Filter
J Input Panel Faceplate
8
D
C
B
J
LENS SIDE
The TPC is a touch-sensitive screen used to control and monitor operation.
For information about TPC controls and settings, see
LED color and blinking rates provide information about the status of the
projector. For information about projector states and status, see
LED Status Indicators
Closing the douser rotates a shutter blade in front of the lamp and reduces
the lamp power to 2.0 kW to conserve lamp life. The override is for
emergency use only.
The lamp door provides access to the lamp compartment and must remain
closed and locked for normal operation. Lamp replacement should only be
performed by qualified technicians. For a complete list of available lamp
types, see Accessories
Extracts heated air from the lamp compartment. The vane switch mounted
inside the rigid port monitors airflow. See
Filters air before it circulates to cool the heat exchanger. For replacement
instructions, see
Covers the motorized lens mount assembly.
A variety of lenses can be used with the D4K2560. For a list of available
lenses, see
Filters the intake air before it circulates through the front compartment to
cool the main electronics. For replacement instructions, see
Light Engine Air Filter
Provides a variety of ports for connecting external devices. For information
about connecting devices and inputs, see
LAMP SIDE
E
I
Description
on page 27.
on page 60.
Replace the Liquid Cooling Air Filter
Accessories on page 60
on page 42.
F
G
H
Menus on page 35.
Projector
Site Requirements on page 7.
on page 42.
Replace the
Connect Devices on page 21.
D4K2560 User Manual
020-101076-01 Rev. 1 (06-2013)