Setting The Ip Address On A Windows Pc - FLIR Nexus Configuration Manual

2 Basic Operation and Configuration
2.9
To set the computer IP address in Windows, first connect the PC to a switch, or connect it to the
camera and ensure the camera has power.
Step 1
Step 2
427-0030-00-28 Version 110

Setting the IP address on a Windows PC

With the PC or laptop connected to the switch (or if back-to-back with the camera, with the
camera powered on), open the Control Panel, Network and Sharing Center (a Windows 7
example is shown). The connection to the camera should show in your Active Networks.
Click to select the Local Area Connection then click Properties, as shown at the right.
Click Properties
Jun 2013
Click to select
2-23